Model
|
Specification
|
Picture for your reference
|
Siemens
|
CP5611
|
a PCI card for programming devices/PCs with PCI slot,optoelectronic isolated,is used to connect programming devices and PCs to PROFIBUS up to 12 Mbit/s and to the multipoint MPI interface of SIMATIC S7
|
|
CP5512
|
SIMATIC NET communication card for laptop,correspond to Siemens 6GK1551-2AA00,optoelectronic isolated,anti-lightning and surging,suitable for laptop PCMCIA 32bit CardBus slot,is used to achieve PROFIBUS/MPI/PPI/FWL communication connection between PC and SIMATIC,communication speed is 9.6Kbps--12Mbps.After switched over by the transition card,it can be used for desk computer and secondary generation ExpressCard slot laptop.CP5512 + (PCI->PCMCIA) transition card,then can be used for desk computer; CP5512 + (PCMCIA(II)->PCMCIA)transition card,then can be used for secondary generation ExpressCard slot laptop.
|
|
USB/PPI
|
USB/PPI interface,programming cable for Siemens S7-200PLC and TP170 touch panel,3 meters,with communication indicator,can replace 6ES7 901-3DB30-0XA0,the largest communication distance of up to 2 kilometers.Not support multi-master station communication.
|
|
USB/PPI+
|
optoelectronic isolated USB/PPI adapter,can replace:6ES7 901-3DB30-0XA0,the largest communication distance of up to 2 kilometers.Not support multi-master station communication.
|
|
USB/PPIM+
|
optoelectronic isolated USB Siemens S7-200PLC multi-master station PPI programming cable,directly use the STEP7 MicroWIN software to communicate,no need to install driver,support PPI,multi-master station PPI and advanced PPI,support 187.5Kbps high speed communication,just the same as 6ES7 901-3DB30-0XA0,3 meters,with communication indicator.
|
|
PC/PPI
|
RS232/PPI interface,programming cable for Siemens S7-200PLC or TP170 touch panel,3 meters,can replace 6ES7 901-3CB30-0XA0.Not support long distance communication and multi-master station communication.
|
|
PC/PPI+
|
optoelectronic isolated PC/PPI cable,support 10 bit and 11 bit modem communication,with communication indicator,automatically adjust the baud rate from 0 to 115.2Kbps,the largest communication distance of up to 2 kilometers.Not support multi-master station communication.
|
|
USB/MPI+
|
optoelectronic isolated USB/MPI,Siemens S7-300/400 PLC Programming adapter cable,3 meters,with communication indicator,can replace Siemens 6ES7 972-0CB20-0XA0,automatically adjust the communication speed from 19.2Kbps to 115.2Kbps for the PC port,automatically adjust the communication speed from 19.2Kbps to 187.5Kbps for the MPI interface.It doesn't support profibus function.
|
|
PC/MPI+
|
optoelectronic isolated RS232/MPI,Siemens S7-300/400 PLC Programming adapter cable,with communication indicator,can replace Siemens 6ES7 972-0CA23-0XA0,automatically adjust the communication speed from 19.2Kbps to 115.2Kbps for the PC port,automatically adjust the communication speed from 19.2Kbps to 187.5Kbps for the MPI interface.Can connect PLC and the touch panel of third party factory to communicate.It doesn't support profibus function.
|
|
PC/MPI
|
Siemens S7-300 PLC Programming cable,5 meters.
|
|
LOGO!USB-CABLE
|
USB optoelectronic isolated programming cable for Siemens LOGO!,2.5 meters,with communication indicator.
|
|
LOGO!PC-CABLE
|
RS232 optoelectronic isolated programming cable for Siemens LOGO!,3 meters,can replace Siemens 6ED1 057-1AA00-0BA0
|
|
MPI extension cable
|
Communication cable between S7-200/300 PLC and Siemens touch panel,5 meters,correspond to Siemens 6ES7 901-0BF00-0AA0.
|
|
RS232 cable
|
RS232 cable for PC/MPI adapter,5 meters,correspond to Siemens 6ES7901-1BF00-0XA0.
|
|
OP programming cable
|
Siemens OP programming cable,3 meters,correspond to Siemens 6XV1 440-2KH32
|
|
420/440-2M
|
Siemens 420/440/430 inverter long-distance operator pannel cable,2 Meters.
|
|
6ES7901-PG702
|
Siemens S7-200 to PG702 cable,2 Meters.
|
|
6ES7 290-6AA20-0XA0
|
Siemens S7-200 PLC I/O extension module connect cable,1 Meter.
|
|
6ES7 290-6AA20-0XA0-2M
|
Siemens S7-200 PLC I/O extension module connect cable,2 Meters.
|
|
6ES7 368-3BC51-0AA0
|
Siemens S7-300 PLC IM360 and IM361 extension cable,2 Meters.
|
|
6ES7 368-3BF01-0AA0
|
Siemens S7-300 PLC IM360 and IM361 extension cable,5 Meters.
|
|
6ES7 368-3CB01-0AA0
|
Siemens S7-300 PLC IM360 and IM361 extension cable,10 Meters.
|
|
6ES7 390-1AF30-0AA0
|
S7-300 PLC rail,530 MM length.
|
|
6ES7 390-1AJ30-0AA0
|
S7-300 PLC rail,830 MM length.
|
|
6XV1-830-0EH10
|
Siemens L2 Profibus cable
|
|
6ES7 972-0BA12-0XA0
|
Profibus connector,without PG port,90 degree
|
|
6ES7 972-0BB12-0XA0
|
Profibus connector,with PG port,90 degree
|
|
6ES7 972-0BA41-0XA0
|
Profibus Connector,without PG port,35 degree
|
|
6ES7 972-0BB41-0XA0
|
Profibus Connector,with PG port,35 degree
|
|
6ES7 392-1AJ00-0AA0
|
S7-300 front connector(20 pin)
|
|
6ES7 392-1AM00-0AA0
|
S7-300 front connector(40 pin)
|
|
Mitsubishi
|
USB-SC09
|
USB/RS422 interface,adapter for Mitsubishi FX & A series PLC,3 meters,with communication indicator, the largest communication distance of up to 2 kilometers.
|
|
USB-SC09-FX
|
USB/RS422 interface,adapter for Mitsubishi FX2N/FX1N/FX0/FX0S/FX1S/FX3U series PLC,2.5 meters,with communication indicator, the largest communication distance of up to 2 kilometers. Compatible with FX-USB-AW.
|
|
SC-09
|
RS232/RS422 interface,3 meters length.Standard programming cable for all Mitsubishi MELSEC FX and A series PLC's.Two kinds: injection moulding cheap one and with IC & communication indicator dear one
|
|
SC-09+
|
optoelectronic isolated SC-09 adapter,communication distance of up to 2 kilometers(9600bps). in particular, apply to the industrial scene.
|
|
SC-10
|
PLC remote communication with modem,go on long-distance communication for FX series(FX2/FX2n/FX0/FX0n..)PLC with modem connecting telephone wire,the other function is the same as SC-09.
|
|
USB-QC30R2
|
USB/RS232 interface,adapter for Mitsubishi Q series PLC,3 meters.
|
|
QC30R2
|
RS232/RS232 interface,cable for Mitsubishi Q series PLC,3 meters.
|
|
QC30R2+
|
Optical Isolated,RS232/RS232 interface,cable for Mitsubishi Q series PLC,4.5 meters.
|
|
FX-20P-CAB0
|
Communication cable from Mitsubishi HPP to FXo/FX2n/FX1N series PLC
length:2 meters
|
|
FX-20P-CAB
|
Communication cable from HPP to FX2 series PLC
length:2 meters
|
|
FX-20P-CADP
|
Adapter cable for Mitsubishi FX0/FX2n/FX1n series PLC,0.4 Meters.
|
|
FX-422CAB0
|
Communication cable between Mitsubishi FX-232AW and FX2N/FX1N/FX0N/FX1S/FX0 series PLC,1.5M
|
|
F2-232CAB-1
|
Transfer cable between computer and FX-232AW/FX0N-232ADP/50DU, 3 Meters
|
|
FX-232CAB-1
|
Programming cable between computer and F940/920 Touch Panel,
2 Meters
|
|
FX-50DU-CAB0
|
Cable to connect F940/F930/F920 to FX0/FX2n series PLC,3/10/30 Meters
|
|
FX-40DU-CAB
|
Cable to connect F940/F930/F920 to FX2 or A Series PLC,3M
|
|
FX9GT-CAB0
|
communication cable between A970GOT and FX0s/FX0n/FX2n/FX1n series PLC,3M
|
|
AC30R4-25P
|
Communication cable between A970GOT and FX2 & A series PLC,3M
|
|
GT01-C30R4-8P
|
Communication cable between Mitsubishi GT11/GT15 touch panel and FX3U/FX2N/FX1N,3/10/30 meters.
|
|
GT01-C30R4-25P
|
Communication cable between Mitsubishi GT11/GT15 touch panel and A/QnA series PLC.
|
|
GT01-C30R2-6P
|
Communication cable between Mitsubishi GT11/GT15 touch panel and Q series PLC. 3 Meters.
|
|
GT01-C30R2-9S
|
Mitsubishi GT11/GT15 touch panel RS232 Serial Port programming cable, 3 Meters.
|
|
FR-CB201/203/205
|
Mitsubishi A540/E540 inverter panel cable,with E54P connector,1/3/5M
|
|
FR-485
|
Communication cable from Mitsubishi A540/E540 inverter to computer,RS232/RS485 interface,3 Meters,used for computer monitored control system of inverter,the largest communication distance of up to 1.2 kilometers.
|
|
FR-485+
|
optoelectronic isolated FR-485 cable,the function is the same as the above.
|
|
FX2N-485-BD+
|
optoelectronic isolated RS485 Board for FX2N PLC,strong anti-interference,anti-lightning & surging protection,the largest communication distance of up to 2 kilometers.
|
|
FX2N-485-BD
|
RS485 interface Board for FX2N PLC,anti-static electricity & surging protection
|
|
FX2N-422-BD
|
RS422 Board for FX2N PLC,anti-static electricity & surging protection
|
|
FX2N-232-BD
|
RS232 Board for FX2N PLC,anti-static electricity & surging protection
|
|
FX2N-USB-BD
|
USB interface Board for FX2N PLC
|
|
FX1N-485-BD
|
RS485 Board for FX1N PLC,anti-static electricity & surging protection
|
|
FX1N-422-BD
|
RS422 Board for FX1N PLC,anti-static electricity & surging protection
|
|
FX1N-232-BD
|
RS232 Board for FX1N PLC,anti-static electricity & surging protection
|
|
FX1N-USB-BD
|
USB interface Board for FX1N PLC
|
|
FX3U-485-BD
|
RS485 Board for FX3U PLC,anti-static electricity & surging protection
|
|
FX3U-422-BD
|
RS422 Board for FX3U PLC,anti-static electricity & surging protection
|
|
FX3U-232-BD
|
RS232 Board for FX3U PLC,anti-static electricity & surging protection
|
|
FX3U-USB-BD
|
USB interface Board for FX3U PLC,anti-static electricity & surging protection
|
|
FX3U-CNV-BD
|
transfer board between FX3U and particular adapter
|
|
OMRON
|
USB-CIF02
|
USB interface Omron series PLC programming cable,with communication indicator,cable connection between CQM1,CPM1, CPM1A, CPM2A,C200HS,C200HX/HG/HE,SRM1 series PLC and the computer. After connected with CS1W-CN114 cable,it can also be connected with CS/CJ,CQM1H and CPM2C series PLC. 3 Meters
|
|
FS-CIF02
|
Correspond to Omron CQM1-CIF02/01,RS232 interface Omron PLC programming cable,3 meters,applicable PLC is the same as the above.
|
|
FS-CIF02+
|
optoelectronic isolated FS-CIF02 interface cable,3 meters,with communication indicator.
|
|
USB-CN226
|
USB interface,cable directly for CS/CJ,CQM1H,CPM2C series PLC,3 Meters.No need to be switched over by CS1W-CN114,with communication indicator.
|
|
FS-CN226
|
Correspond to Omron CS1W-CN226,RS232 interface Omron PLC programming cable directly for Omron CS/CJ , CQM1H , CPM2C series PLC.No need to be switched over by CS1W-CN114,2.5 Meters.
|
|
FS-CN226+
|
optoelectronic isolated FS-CN226 cable,3 meters,with communication indicator.
|
|
USB-XW2Z-200S
|
USB/RS232 interface,cable for Omron PLC Programming,3 Meters,RS232 interface with communication indicator.
|
|
XW2Z-200S
|
RS232/RS232 interface Omron PLC programming cable,2 meters.
|
|
XW2Z-200S+
|
optoelectronic isolated XW2Z-200S cable,communication distance of up to 2 kilometers.
|
|
USB-CIF31
|
Convert cable from USB to RS232(standard DTE interface).1 meter,with communication indicator,support traditional RS232 PLC prgramming cables.
|
|
FS-CIF11
|
compatible with CPM1-CIF11/CIF12,can connect CPM1A/2A,CQM1,C200H? PLC outer interface or RS232 interface,4 lines RS422 and 2 lines RS485 interface output,support multi-station communication,standard lead rail installation.
|
|
FS-CIF13
|
Equal to Omron CPM1-CIF11/CIF12+CS1W-CN114,can connect CS/CJ,CQM1H and CPM2C PLC outer interface or RS232 interface,4 lines RS422 and 2 lines RS485 interface output,support multi-station communication,standard lead rail installation.
|
|
Panasonnic
|
USB8550
|
USB/RS422 interface Panasonnic PLC adapter for FP1/FP3/FP5 PLC(need convert cable),1 meter,with communication indicator,the largest communication distance of up to 2 kilometers.
|
|
USB8551
|
Equal to USB8550+AFP1523 or USB8550+AFP5523,USB interface cable directly for Panasonnic FP1,FP3/FP5 PLC programming,no need convert cable,3 meters,with communication indicator.
|
|
AFP8550
|
RS232/RS422 interface Panasonnic PLC adapter,1.5 meters.
|
|
AFP8550+
|
optoelectronic isolated AFP8550 adapter,communication distance of up to 2 kilometers.
|
|
AFP8551
|
Equal to AFP8550+AFP1523 or AFP8550+AFP5523,RS232 interface cable directly for Panasonnic FP1,FP3/FP5 PLC programming,no need convert cable,3 meters
|
|
AFP5523
|
Communication cable between Panasonnic FP3,FP5 series PLC and AFP8550 adapter or HPP,3 meters.
|
|
USB8513
|
USB interface programming cable for Panasonnic FP0,FP2,FP-M series PLC,3 meters,with communication indicator,suitable for all softwares.
|
|
AFC8513
|
Panasonnic PLC computer programming cable,Communication cable between computer and FP0,FP2,FP-M series PLC,3 meters.
|
|
AFC8513+
|
optoelectronic isolated AFC8513 cable
|
|
AFC8523
|
Panasonnic PLC HPP cable,Communication cable between HPP and FP0,FP2,FP-M series PLC,3 meters.
|
|
BFV9062/9063/9065
|
Panasonnic,Fuji,Sanken inverter panel cable,2m/3m/5m.
|
|
GE
|
IC690USB901
|
USB/SNP interface GE 90 series PLC programming cable,3 meters,with communication indicator,the largest communication distance of up to 1.5 kilometers.
|
|
IC690ACC901
|
RS232/SNP interface GE 90 series PLC programming cable,3 meters.Two shape:injection moulding integral structure and adapter with communication indicator.
|
|
IC690ACC901+
|
optoelectronic isolated IC690ACC901 cable,communication distance of up to 1.5 kilometers.
|
|
Fuji
|
USB-CNV3
|
USB interface Fuji N Series PLC (NB, NJ, NS, NW0, etc.)programming cable, USB/RS422 interface, 3 meters, with communication indicator, the largest communication distance of up to 1.5 kilometers.
|
|
NN-CNV3
|
RS232 interface Fuji N series PLC (NB, NJ, NS, NW0, etc.)programming cable, RS232/RS422 interface, 3 meters.
|
|
NN-CNV3+
|
optoelectronic isolated NN-CNV3 interface, built-in anti-lightning protection, communication distance of up to 1.2 kilometers, strong anti-interference, in particular, apply to the industrial scene.
|
|
Schneider
|
TSXPCX3030
|
USB/RS485 interface cable for Schneider PLC programming,2.5 meters,with master/slave switch,connect the TER and AUX port of PLC,the largest communication distance of up to 2 kilometers.
|
|
TSXPCX3030+
|
optoelectronic isolated USB interface TSXPCX3030 cable,connect the TER port of PLC.
|
|
TSXPCU1030
|
RS232 interface Schneider PLC programming cable,RS232/RS485 interface,3 meters,master station mode.
|
|
TSXPCU1030+
|
optoelectronic isolated TSXPCU1030 cable
|
|
TSX08PRGCAB£¨TSXPCX1031)
|
RS232/RS485 interface cable for Schneider PLC programming,3 meters,with master/slave switch,used for programming communication or other communication such as MODBUS.
|
|
AB
|
1747-PIC
|
AB SLC5 series PLC programming cable,RS232/DH-485 interface,3 meters.
|
|
Delta
|
USBACAB230
|
USB interface Delta DVP series PLC programming cable,USB/RS232 interface,connect COM1 interface of PLC,3 meters,with communication indicator.
|
|
